Dining Chairs
A staff cafeteria or lunchroom needs seating that can take a different person every break, all day, for years, without looking or feeling like it belongs in a warehouse. Sit Spot’s commercial dining chairs and lunchroom chairs cover stackable, timber and upholstered styles, chosen for the staff room, canteen or breakroom rather than a customer-facing dining floor.
Whether you’re fitting out a single lunchroom or a staff cafeteria across multiple floors, we have a style to suit the space, and if nothing here fits, we’ll source the right chair for you. If you’re seating a hospitality venue’s own customers rather than your staff, our Cafe/Restaurant Chairs range is built for that instead, and for general multi-use seating across a whole business, our Stackable Chairs range covers that too.
Need Advice ?
Free ConsultationShowing 1–20 of 34 results
-
Client Side
-
Client Sled
-
Dante
-
Dora Road
-
Dora Road Seat Pad
-
Dora Snowball
-
Dora Snowball Seat Pad
-
HÅG Celi 9100 Post-consumer plastic (PP) seat and back
-
HÅG Celi 9140 Upholstered seat – post-consumer plastic (PP) seat and back
-
HÅG Celi 9160 Upholstered seat and back – post-consumer plastic (PP) seat and back
-
HÅG Celi 9200 Wood Wooden seat and back
-
HÅG Celi 9240 Upholstered seat and wooden back
-
HÅG Conventio 9510 Upholstered seat and backrest front (plastic back)
-
HÅG Conventio 9511 Upholstered large seat and backrest front (plastic back)
-
HÅG Conventio 9520 Fully upholstered seat and backrest
-
HÅG Conventio 9521 Fully upholstered large seat and backrest
-
HÅG Conventio Wing 9811 Plastic seat and back
-
HÅG Conventio Wing 9821 Removable upholstery on seat
-
HÅG Conventio Wing 9831 Removable upholstery on seat and back
-
Hendrix Mini
Dining Chairs
What makes a chair suited to a staff cafeteria or lunchroom
A lunchroom chair takes a different kind of daily use than a desk chair: it’s sat in for a quick break rather than a full working day, by whoever happens to be on break at the time, and it needs to wipe clean fast after coffee, lunch or a spill. The frame has to survive being pushed back, dragged across a floor and used by dozens of different staff members through a week, without the finish or joints showing it. None of this shows up in a photo, which is why businesses fitting out a staff cafeteria tend to ask about frame construction and cleaning as much as the look of the chair.
Commercial dining chairs vs cafe and restaurant chairs: not the same buyer
Both categories look similar on paper, but they’re built for different rooms. Cafe and restaurant chairs seat a hospitality venue’s paying customers, on a floor where presentation and brand feel usually matter as much as durability. Commercial dining chairs and lunchroom chairs seat a business’s own staff, in a cafeteria, canteen or breakroom where durability, ease of cleaning and cost per chair usually matter more than a coordinated hospitality look. If you’re fitting out a venue that seats customers rather than staff, our Cafe/Restaurant Chairs range is the better starting point.
Commercial dining chairs vs stackable chairs: which category fits
These two ranges overlap in construction but not in purpose. Stackable chairs are chosen for a room that changes shape day to day, such as a boardroom that becomes a training room, and the priority is a chair that can be cleared and stored fast. Commercial dining chairs and lunchroom chairs are chosen for a room that keeps the same layout most of the time, such as a staff cafeteria, where the priority is durability and easy cleaning rather than fast reconfiguration. Plenty of lunchroom chairs do stack, but that’s a bonus feature here rather than the reason the category exists. For a room that needs to change shape regularly, our Stackable Chairs range is worth a direct look.
Choosing between stackable, timber and upholstered styles
A stackable poly or metal-frame chair suits a high-turnover lunchroom that sees constant use through the day, since it wipes down fast and holds up to repeated contact. A timber-frame chair reads as a step up in presentation for a staff cafeteria that doubles as a space for visitors or client meetings, though it needs a bit more care than a moulded shell. An upholstered chair adds comfort for a break room where staff spend longer sitting, such as a dedicated rest area, but comes with more regular cleaning than a hard-shell design. None of these is the wrong choice; it comes down to how the room is used and how much presentation matters against pure durability.
What to check before you order
A few things matter more with commercial dining and lunchroom chairs than with customer-facing hospitality seating:
- Frame material and construction, since staff cafeteria seating takes constant daily turnover across a whole workforce
- Stackable versus fixed design, matched to whether the room needs to be reconfigured or stays as one layout
- Upholstery versus a wipe-clean finish, weighed against how much food and drink contact the room sees
- Chair height against your lunchroom or cafeteria table height, checked before ordering rather than assumed
- Weight and dimensions, listed on each product page so chairs can be compared for ease of moving and storing
- AFRDI or BIFMA certification on selected models, useful where a documented commercial-use rating matters
Ordering dining and lunchroom chairs in quantity
Staff cafeterias and lunchrooms are almost always fitted out as a full matched set rather than a handful of chairs added over time, since a mismatched room is obvious the moment staff are seated. Order the complete quantity in one placement where possible, and factor in a small number of spares, since a chair damaged in the first few months of daily lunchroom use is easier to replace from stock ordered at the same time than sourced later as a one-off match. For a business fitting out cafeterias across several sites, confirming stock levels and lead times before each rollout avoids one site opening short.
Caring for commercial dining and lunchroom chairs
Wipe down hard finishes after peak lunch periods rather than waiting for a visible mark to set in, since a staff cafeteria sees more contact with food, drink and hands across a workforce than almost any other commercial seating. Check frames and any stacking points periodically, since these carry the most repeated stress from daily use across a full staff roster. Upholstered chairs benefit from a more thorough clean on a regular schedule rather than only when visibly marked. A chair caught early with a loose joint is a simple fix; left too long through daily lunchroom use, it becomes a replacement.
Sit Spot’s commercial dining and lunchroom chair range
Sit Spot’s commercial dining chairs and lunchroom chairs include the Client Side and Client Sled, Dante, Dora Road and Dora Snowball, the HÅG Celi and HÅG Conventio ranges, Hendrix Mini, Hera Breakout Chair, Jag Timber and Jag Upholstered, Lily, Lotus Timber, Maya, Milo, Mondo, Nyx Breakout Chair, Rio, Taurus, Vienna and Virgo. If you’re seating a hospitality venue’s own customers rather than your staff, our Cafe/Restaurant Chairs range is worth a look, and for our full range of commercial seating, browse our Seating category.
Looking for commercial dining chairs or lunchroom chairs for sale in Australia? Browse our full range of products from the menu above and get your desired chairs quoted, or call us on 1300 748 776 or 0414 247 500, or contact us and we’ll help you match chairs to your cafeteria or breakroom.
Frequently asked questions
What’s the difference between commercial dining chairs and cafe or restaurant chairs?
Commercial dining chairs and lunchroom chairs seat a business’s own staff in a cafeteria, canteen or breakroom, where durability and easy cleaning matter most. Cafe and restaurant chairs seat a hospitality venue’s paying customers, where presentation usually matters as much as durability.
What’s the difference between commercial dining chairs and stackable chairs?
Stackable chairs are chosen for a room that needs to change shape often, like a boardroom used for training. Commercial dining chairs are chosen for a room with a settled layout, like a staff cafeteria, where durability and cleaning matter more than fast reconfiguration.
Should I choose stackable, timber or upholstered lunchroom chairs?
Stackable poly or metal-frame chairs suit a high-turnover lunchroom. Timber suits a cafeteria that also hosts visitors or client meetings. Upholstered chairs add comfort for a dedicated rest area but need more regular cleaning.
What chair height suits a standard lunchroom or cafeteria table?
Standard dining height suits most staff cafeteria and lunchroom tables. Check your existing table height against the chair’s listed dimensions before ordering.
Can I order matching chairs across cafeterias at several sites?
Yes. Ordering the same chair across multiple sites is common for multi-site businesses, and confirming stock and lead times up front avoids one site opening short.
Can commercial dining and lunchroom chairs be delivered outside Sydney?
Yes. Sit Spot is proudly based in Sydney and ships Australia-wide, including regional areas, with on-site assembly available.
Fitting out a staff cafeteria, canteen or breakroom? Browse our full range of products from the website menu and get your desired chairs quoted, or contact us and we’ll help you match chairs to your space.
